Wood

Marking or cutting of small parts for subsequent inlay can be carried out on veneered wood.

In case of solid wood or by-products such as MDF, surface marking or deep and multi-layer marking can be performed in order to get a sort of 3D effect.

Yes, they can be worked according to the model of machine used. For instance with the S2X model, plates that are 2 m high and of any length can be marked on a continuous basis.

No, it cannot, as the laser focus machine size is very small (0,2-0,5 mm) and the marking/cut speed is very high and therefore the time the laser beam hits the material is very short even when marking is deeper.

Yes, the BX Multiaxes system can work 3D surfaces but it is essential that the piece can be placed on the machine rotating support.